(icomman 0.6] Problem with is Moving

This is where you talk about the NXJ software itself, installation issues, and programming talk.

Moderators: 99jonathan, roger, imaqine

(icomman 0.6] Problem with is Moving

Postby ramso » Mon Aug 27, 2007 6:41 pm

The method isMoving in pilot don't return false if only one of the motors are rotating.
For example with a navigator with track distance 12, i make a steer with a turn radio of 6, only the outside motor rotate, and if immediatereturn are false i have a infinite while.
ramso
New User
 
Posts: 8
Joined: Thu Aug 09, 2007 5:41 pm
Location: Spain

Postby bbagnall » Mon Aug 27, 2007 10:45 pm

There was a bug in the code but it's fixed for the next release. It should now work under NXJ firmware or LEGO firmware equally.
User avatar
bbagnall
Site Admin
 
Posts: 392
Joined: Fri Aug 04, 2006 4:03 pm

Postby ramso » Tue Aug 28, 2007 7:06 pm

ok, thanks, it's not really difficult to resolve the problem in my code.
ramso
New User
 
Posts: 8
Joined: Thu Aug 09, 2007 5:41 pm
Location: Spain


Return to NXJ Software

Who is online

Users browsing this forum: pasyaerwpj and 1 guest

more stuff