Problems with NXTCam V3

This is where you talk about the NXJ hardware related topics such as the brick, sensors, LEGO pieces, etc.

Moderators: 99jonathan, roger, imaqine

Problems with NXTCam V3

Postby adceran » Thu May 19, 2011 6:09 pm

Hi to all,

My problem is the next. I have one program that follows the red color. It works perfectly when I use the NXTCamV2. However, if I replace this cam and put the NXTCamV3, my robot don't walk, and the Cam don't capture any blood. Is any specific configuration necessary to use the NXTCamV3 with lejOS??

Thank you very much! :) :wink:
adceran
New User
 
Posts: 2
Joined: Thu May 19, 2011 6:01 pm

Re: Problems with NXTCam V3

Postby gloomyandy » Fri May 20, 2011 8:26 am

Can you read anything from the V3 do you get the version strings etc? If not are you sure you have the correct address? try running the i2cdevices sample, this should identify the sensor and what address it is using...

Andy
User avatar
gloomyandy
leJOS Team Member
 
Posts: 4038
Joined: Fri Sep 28, 2007 2:06 pm
Location: UK

Re: Problems with NXTCam V3

Postby adceran » Fri May 20, 2011 10:51 am

Thanks, finally I can obtain a solution to the problem. Regards :wink:
adceran
New User
 
Posts: 2
Joined: Thu May 19, 2011 6:01 pm


Return to NXJ Hardware

Who is online

Users browsing this forum: No registered users and 1 guest

more stuff