trouble with icontrol for osx

This is where you talk about the NXJ software itself, installation issues, and programming talk.

Moderators: 99jonathan, roger, imaqine

trouble with icontrol for osx

Postby mikeandtrav » Mon Apr 02, 2007 4:08 pm

I've been trying to get icommand working on my mac and it isn't working. The <> doesn't show up on the nxt. So, I went to

"3.4 If the program just hangs when you send a command, and you don't see the <> on the NXT LCD, you probably chose the wrong COM number. Stop your program, turn off/on your NXT and go back to 2.3 and try another."

I went through 2.3 and did everything exactly as it says. Any ideas?
________
ESSENTIAL VAAAPP VAPORIZER
Last edited by mikeandtrav on Thu Feb 24, 2011 9:23 pm, edited 1 time in total.
mikeandtrav
New User
 
Posts: 3
Joined: Mon Mar 26, 2007 4:52 pm

Postby bbagnall » Wed Apr 04, 2007 8:45 pm

Anyone here with Mac OS X know how to identify the available com ports?
User avatar
bbagnall
Site Admin
 
Posts: 392
Joined: Fri Aug 04, 2006 4:03 pm

Postby edalquist » Sun Apr 08, 2007 6:16 pm

I found this which made it work for me:

http://www.sturzflug.ch/wiki/doku.php?i ... s:icommand

The step that the icommand docs leave out is the pair for security option.
edalquist
Novice
 
Posts: 48
Joined: Sun Apr 08, 2007 5:55 pm

Postby mikeandtrav » Wed Apr 11, 2007 4:24 pm

YES. Thank you so much. IT's alive!!! The only thing the lejos readme is missing is this line "A serial port (rs232-connection) should allready be setup. Mark require paring for security and click apply" I did that and it worked. I may have also had the com ports labeled wrong in icommand.properties also.

Our final project will be a success!
________
Volcano vaporizer
mikeandtrav
New User
 
Posts: 3
Joined: Mon Mar 26, 2007 4:52 pm


Return to NXJ Software

Who is online

Users browsing this forum: No registered users and 2 guests

cron
more stuff