Resetting/fixing the IR Link sensor - Edit: Dropped

This is where you talk about the NXJ hardware related topics such as the brick, sensors, LEGO pieces, etc.

Moderators: 99jonathan, roger, imaqine

Resetting/fixing the IR Link sensor - Edit: Dropped

Postby LasseD » Fri Jul 25, 2008 8:34 pm

I have been fooling around with the IR Link for some time now, trying to make the different modes work, but I have stumbled into a problem:

It doesn't work anymore!

Like other HiTechnic sensors, I think this can be fixed by resetting/recalibrating the sensor, but I don't know how.

I have checked the following:
- The IR-diode in the sensor works (you can see it using a digicam)
- The sensor doesn't work with LEGO's own firmware anymore
- The sensor doesn't work with Lejos 0.5
- The sensor doesn't work with Lejos 0.6
- The sensor worked before attempting to give output to channel "4".
- My receivers work (checked using conventional IR-remote)
- The sensor can't be reset using the procedure from the ultrasonic sensor (now that would have been too easy)
- HiTechnic says "Programming details and sample programs will be posted here shortly.". Has been saying that since the sensor was released and thinks support from auto-away messages is adequate.

Now. Has anyone else tried to reset the sensor or knows how to solve this problem?

Thanks in advance.

Edit
I have replaced the sensor now, as there was no help to get it fixed. HiTechnic has received the old one.
LasseD
New User
 
Posts: 4
Joined: Sat Jun 14, 2008 9:43 am

Return to NXJ Hardware

Who is online

Users browsing this forum: No registered users and 1 guest

cron
more stuff